EV Charger Install Cost Calculator
Hardware, labor and permit cost for a home Level 2 charger.
A 200A service with open breaker slots usually doesn't need an upgrade; an older or full panel often does.
How to use this calculator
Choose how far the charger will be from your electrical panel and whether your panel needs a capacity upgrade. Panels with no open breaker slots, or an older 100A service, often need an upgrade to safely add the 40–60A circuit a Level 2 charger needs.
How this is calculated
The calculator adds a fixed range for charger hardware and permit/inspection fees to a labor estimate that scales with the wire run, then adds a panel upgrade if you select one. These are national ranges for a typical single-family home; local labor rates and code requirements vary.
Typical cost ranges
Hardware runs $450–$700 for the charger unit itself. Labor for a short run near the panel is commonly $400–$700, rising to $1,200–$2,000 for a long run or one that needs trenching. A panel upgrade, when needed, adds about $1,500–$2,800 for 200-amp service with a new meter box. For other amperages or a subpanel, use the electrical panel upgrade cost calculator.
Estimate only, based on published 2026 national price ranges. The federal Section 30C alternative fuel vehicle refueling property credit (30% of cost, up to $1,000, for homes in eligible census tracts) expired for property placed in service after June 30, 2026, and isn't included here. Some states, utilities, and installers still offer their own rebates — check locally.
Read the full guide
How Much Does It Cost to Install a Home EV Charger?